Know UsProductsClientsContact UsFeedback
toroidal power transformer
toroidal current transformer
 


Current transformers are used for electrical measuring instruments and / or electrical protective devices. They are very useful in high power circuits where the current is large. Current transformers are subdivided into two main categories.
  MEASURING CURRENT TRANSFORMER   PROTECTIVE CURRENT TRANSFORMERS
These transformers are used in measuring and indicating current, that is to reduce the line current to a value which is suitable for standard measuring instruments, relays etc. These transformers are used for over current and undercurrent relaying for power circuit protection.


TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary
Ring / Bar type current transformer :
A current transformer where primary winding is provided by 'the user.		 Wound primary current transformer
A current transformer having a primary winding of more than one full turn wound on core.

Current Transformers are wound on Toroidal cores which virtually eliminates error due to leakage flux. Adjusting the number of secondary turns may compensate for some errors.

Electrical Specifications :

Type : Ring and wound type
Type. : Tape insulated ring type and Epoxy resin potting type.
Primary Current : 50 Amp. To 3000 Amp. in Ring type, 25 Amp. To 600 Amp. in epoxy resin
Secondary Current : 5 Amp. and 1 Amp. for Ring type, 0.2 , 0.1 and 0.05 Amp. for epoxy resin ( other on request)
Burden : 5, 10, 15 VA. for Ring type, 0.25, 0.5, 1 and 2 VA. for epoxy resin type ( other on request)
Accuracy Class
: 0.2, 0.5, 1.0, 5.0, 10.0
Frequency : 50 Hz
Operating Temp. : - 10 deg. C to 40 deg. C.
Conforms to : IS 2705

Technical Specification

RATIO
IN AMP.
BURDEN
VA
CLASS
APPROXIMATE DIMENSION IN MM
     
A
B
C
50/5
5
5
30
80
50
60/5
5
5
30
80
50
75/5
5
5
30
80
50
100/5
5
1
30
80
50
150/5
5
1
30
80
50
200/5
10
1
50
95
40
250/5
10
1
50
95
40
300/5
10
1
50
95
40
400/5
15
1
60
100
35
500/5
15
1
60
100
35
600/5
15
1
60
100
35
800/5
15
1
85
125
35
1000/5
15
1
85
125
35
1200/5
15
1
110
145
30
1500/5
15
1
120
155
30
1600/5
15
1
120
155
30
2000/5
15
1
120
155
30
2400/5
15
1
135
170
30
2500/5
15
1
135
170
30
3000/5
15
1
135
170
30




The genral tolerance for dimensions +/- 3 mm



We also manufacture non standard current transformer to meet the customers specification.Due to constant attempt to improve the design and due to change in the quality of material available, the figures given above are for general guidance only and are subject to confirmation.

Designed by : MID  Hosted by : PBD  Promoted by : GID